Weigh Feeders do a continuous weighing and controlling of bulk material feeding as per desired set point. Load cells of required capacity are installed below Weighing Idler/Rollers to get load applied on belt at particular area (i.e. silent zone) by moving material. In a second 30-40 weighments are done for bulk material, running for desired accuracy. The microcontroller based weigh feeder controller receives the weight and speed from optical encoder.
It processes these two inputs received from the field and calculates the feed rate as well as calculates the cumulative weight passed through the Weigh feeder.
Set point TPH and start command can be given from the 3 locations (i.e. Local Panel , WF Panel & Master PLC) based on the selection switch (i.e. mode of operation) provided on WF Panel, whereas stop command can be given from all the locations irrespective of mode of operation.
The accuracy particularly depends on the operation and consistent material spread on carrying belt.
There is a provision to adjust the Load cell height and to remove the material deposited on the conveyer (on line) to get better accuracy.
BELT WEIGH FEEDER/ WEIGH FEEDER
Weigh Feeders do a continuous weighing and controlling of bulk material feeding as per desired set point. Load cells of required capacity are installed below Weighing Idler/Rollers to get load applied on belt at particular area (i.e. silent zone) by moving material. In a second 30-40 weighments are done for bulk material, running for desired accuracy. The microcontroller based weigh feeder controller receives the weight and speed from optical encoder.
It processes these two inputs received from the field and calculates the feed rate as well as calculates the cumulative weight passed through the Weigh feeder.
Set point TPH and start command can be given from the 3 locations (i.e. Local Panel , WF Panel & Master PLC) based on the selection switch (i.e. mode of operation) provided on WF Panel, whereas stop command can be given from all the locations irrespective of mode of operation.
The accuracy particularly depends on the operation and consistent material spread on carrying belt.
There is a provision to adjust the Load cell height and to remove the material deposited on the conveyer (on line) to get better accuracy.
| Belt Weigh Feeder,Belt Weigh Feeder in india,Belt Weigh Feeder manufacturers in india,Belt Weigh Feeder suppliers in india,dealers,best,india
Call Back
BELT WEIGH FEEDER/ WEIGH FEEDER
Weigh Feeders do a continuous weighing and controlling of bulk material feeding as per desired set point. Load cells of required capacity are installed below Weighing Idler/Rollers to get load applied on belt at particular area (i.e. silent zone) by moving material. In a second 30-40 weighments are done for bulk material, running for desired accuracy. The microcontroller based weigh feeder controller receives the weight and speed from optical encoder.
It processes these two inputs received from the field and calculates the feed rate as well as calculates the cumulative weight passed through the Weigh feeder.
Set point TPH and start command can be given from the 3 locations (i.e. Local Panel , WF Panel & Master PLC) based on the selection switch (i.e. mode of operation) provided on WF Panel, whereas stop command can be given from all the locations irrespective of mode of operation.
The accuracy particularly depends on the operation and consistent material spread on carrying belt.
There is a provision to adjust the Load cell height and to remove the material deposited on the conveyer (on line) to get better accuracy.
| Belt Weigh Feeder,Belt Weigh Feeder in india,Belt Weigh Feeder manufacturers in india,Belt Weigh Feeder suppliers in india,dealers,best,india
Call Back